Flowed Plumb Ice Maker(Cube ice) YIM-JJ001

Standard Features

◉All 304 stainless steel shell, food grade PE ice storage bucket

◉8KG ice storage space

◉Large area heat dissipation hole design, high heat dissipation efficiency

◉Pull-down ice storage door panel saves space and is easy to take ice

◉Hidden switch design, to avoid collisions during operation and cause the equipment to stop running

◉Cyclopentane foaming material is used to thicken the foaming layer and the thermal insulation performance is better

◉The front-mounted air filter design is easy to clean and protect the machine

◉R1/2 thread connection water inlet is reserved and a 1.5-meter water inlet pipe is provided

◉AD25 drain port is reserved and a 1.75m drain pipe is also provided

◉The device comes with a 1.75-meter power cord, which can be directly connected to the electricity, pay attention to reserve a socket at the installation position

Function

◉Built-in evaporator, fully enclosed refrigeration system, long service life

◉Adopt high-efficiency refrigeration system to increase the production capacity of the whole machine by over 10%

◉Adopt special noise reduction technology to reduce working noise by 13%

◉The ice falling method using heat pump and flowing water;

◉Using R404A refrigerant, more environmentally friendly;

◉The equipment has a one-key cleaning function;

◉The equipment has full water protection function;

◉The equipment has a water shortage protection function;

◉The equipment has compressor high pressure protection function;

◉The equipment needs to be used in an environment of 1-43℃, the water pressure needs to be controlled between 0.5-8bar, the ambient temperature is 20℃, the water temperature is 15℃, the daily ice output can reach 40KG, the ambient temperature is 32℃ and the water temperature is 20℃, the daily ice output can reach30KG

Optional Features

◉3cm、6cm、10cm、15cm High foot

◉water softener